HP550 Secondary Cone Crusher for Sale

HP550 is a secondary standard head cone crusher, which is driven by a 375 kW motor and has a closed side setting of approximately 30-35mm.

The secondary HP500 is fitted with a hydraulic remote CSS adjustment system that allows a gap adjustment to be performed from a Citect command. Feed is temporarily stopped to the crusher while this procedure takes place.

The crusher is fitted also with a tramp release system, which prevents damage to the crusher if maximum crushing forces are exceeded through overfeeding or contamination with tramp metal. Repeated and frequent “tramping” of the crusher will result in long term structural damage. Vibration monitoring installed on the crusher to provide information to the operator concerning the level of tramping occurring.

A standard coarse bowl liner is installed, which permits a maximum feed lump size of 291mm, with a minimum or tightest possible CSS of 30mm.